ENGINEERING AND DESIGN SERVICES

- PRODUCT DESIGN

- 3D MODELING SERVICES

- DRAFTING SERVICES

- VALUE ENGINEERING

Acer

About Us

We simply have a passion for building really great systems/designs and implementing solutions based on thorough design and engineering practices. In this company we care about our customers. The internet has allowed us to work without walls. The result is a laser like focus on developing great products on time while achiving superior quality and service.

Acer's contracted efforts all rely on a basic set of beliefs tempered by the needs of real-world engineering. First of all, we take a systems approach to everything we do. We employ solid design/analysis techniques that drive successful product design and lifecycle support. Ultimately we have a basic, dogged almost relentless drive to get the product done on time and under budget. Because we know in the real-world, people have budgets and schedules to live with.

Directions to our office:

FROM/THROUGH LEXINGTON:

Traveling east on I-64, take the Mountain Parkway at Exit 98 approximately 2 miles east off the 2nd Winchester exit.

Continue East on the Mountain Parkway to Exit 57. This is the West Liberty/Lee City/KY 205 North exit. Turn left at the bottom of exit ramp, proceed under the Mt. Parkway and turn left again onto KY 205 North.

Take KY 205 to US 460 – about 8 miles.

At US 460 (traffic light) turn right and travel approximately 4 miles in the direction of West Liberty.

At the first traffic light turn left onto KY 2498 Liberty Road (West Liberty Ford Dealership is on the corner).

Go approximately 300 yards and turn right - up the hill. The Regional Technology Center is the first building you see on the left.

During the day, parking is usually available in the large lot between the two buildings. In the evenings, or if the large lot between the two buildings is full, plenty of parking is available on top of the hill in the vicinity of the large blue factory (vacant) building. The few parking spaces closest to the Center are reserved for the Morgan County Public Library patrons.

FROM MAYSVILLE / MOREHEAD:

Traveling south toward Morehead on KY 32 go to US 60 (in Morehead). At the US 60 intersection, turn right at the traffic light. Travel approximately .5 miles to the next traffic light. Turn left onto KY 519.

Travel approximately 22 miles on KY 519/KY 7 to the first traffic light in West Liberty (this is the intersection of KY 7/US 460/Main Street). Travel straight through town on US 460/Main Street, go up a hill – the Eastern Kentucky Correctional Complex (prison) is at the top of the hill on the left (salmon colored facility).  At the bottom of the hill is a traffic light.

At this traffic light turn right onto KY 2498 (West Liberty Ford Dealership is on the right).

Go approximately 300 yards and turn right - up the hill. The Regional Technology Center is the first building you see on the left.

During the day, parking is usually available in the large lot between the two buildings. In the evenings, or if the large lot between the two buildings is full, plenty of parking is available on top of the hill in the vicinity of the large blue factory (vacant) building. The few parking spaces closest to the Center are reserved for the Morgan County Public Library patrons.

FROM ASHLAND:

Via KY 7 – Sandy Hook: Traveling west on I-64, take Exit 172 (Grayson) and turn left onto Carol Malone Boulevard/KY 7. Follow KY 7 approximately 40 miles through Sandy Hook and to the first traffic light in West Liberty (this is the intersection of KY 7/US 460/Main Street).

Via Morehead: Traveling west on I-64, take Exit 137 (Morehead) and turn left onto KY 32 South.

Travel approximately 3 miles to the US 60 intersection and turn right at the traffic light and travel approximately .5 miles to the traffic light and turn left onto KY 519.

Follow KY 519/KY7 to the first traffic light in West Liberty which is approximately 22 miles.

Travel straight through town on Main Street/US 460, go up a hill – the Eastern Kentucky Correctional Complex (prison) is at the top of the hill on the left (salmon colored facility).  At the bottom of the hill is a traffic light.

At this traffic light turn right onto KY 2498 (West Liberty Ford Dealership is on the right).

Go approximately 300 yards and turn right - up the hill. The Regional Technology Center is the first building you see on the left.

During the day, parking is usually available in the large lot between the two buildings. In the evenings, or if the large lot between the two buildings is full, plenty of parking is available on top of the hill in the vicinity of the large blue factory (vacant) building. The few parking spaces closest to the Center are reserved for the Morgan County Public Library patrons.

FROM PIKEVILLE/PRESTONSBURG:

Travel west on Mt. Parkway to Exit 57. This is the West Liberty/Lee City/KY 205 exit. Turn left at the bottom of exit ramp onto KY 205 North.

Take KY 205 to US 460 – about 8 miles.

At US 460 (traffic light) turn right and travel approximately 4 miles in the direction of West Liberty.

At the first traffic light turn left onto KY 2498 (West Liberty Ford Dealership is on the corner).

Go approximately 300 yards and turn right - up the hill. The Regional Technology Center is the first building you see on the left.

151 University Dr.

Suite 301

West Liberty, Ky 41472

1-877-743-4005 EXT. 302
info@acertechonline.com

Web Hosting Companies